Optic Fiber Protective Sleeve

Optic Fiber Protective Sleeve stainless steel reinforcing bar,protect the optical fiber when splicing Optic Fiber Protective Sleeve (Simplex Type)    Optic Fiber Protective Sleeve is applied to the optical fiber closure to fix and protect the optical fiber when splicing.    The sleeve can be divided into two types (single and mass) according to the function. The single type is used for the single-fiber, and the mass type is used for the ribbon fiber. It is different in the reinforcement between two types. The single one realizes the reinforcement by the stainless steel needles, the later one via the ceramic reinforcement member to realize the function.    Mass means there are several cores for the fiber. So the mass sleeve includes 4cores, 6cores, 8cores, 12cores etc.  Features 1. Hot melt adhesive 2. Ceramic reinforcement member 3. Heat shrinkable tube 4. Stainless steel needle  Specifications

Parameters	Single Fiber
Shrinking Temperature	110 ~ 130
Radial Shrinking Rate (%)	>50
Axial Shrinking Rate (%)	<10
Low Temperature Property	No crackle at -55 lasting 4 hours
Normal Operation Temperature	-40 ~ +60
Normal Operature Relative Humidity	≤95%
Spark-over Strength (kV/mm)	≥20
Tensile Strength (Mpa)	20
Loss at -40	0.03dB
Loss at +60 RH95%	0.01dB

  Test Report for 1.5mm/60mm

Parameters		FPSS-60C5
Outer tube	Outer diameter	3.9±0.1
	Thickness	0.2±0.05
	Length	60.0±1
	Material	Flexible Polyolefin
Inner tube	Inner Diameter	1.5±0.1
	length	56.0±
	Thickness	10.3±0.05
	Material	EVA
Steel bar	Diameter	1.5±0.05
	Length	55.0±0.25
	Meterial	302 stainless steel rob
Splicing finished diameter	3.4*3.0±0.1
Operating temperature	-55 to+135

Optic Fiber Protective Sleeve